GarageBand Jam Pack 2: Remix Tools Tips (Manual) - Apple

Extrait du fichier (au format texte) :

1

Tips for Using GarageBand Jam Pack 2:
Remix Tools Instruments

The GarageBand Jam Pack 2: Remix Tools package contains over 100 Software Instrument presets you can use to create remixes in a variety of contemporary genres. In addition to synthesizer instruments, Remix Tools includes Software Instruments in the following categories:
" Drum kits, including kits based on classic Roland drum machines
" Keyboard instruments for creating chordal riffs and pads
" Sound Effects kits  you can use for atmospheric effects and transitions
This document describes the Drum Kit, Keyboard, and Sound Effects instruments included in
Remix Tools, and lists controller information for each of these instruments.

Drum Kits
Remix Tools includes 22 drum kits, featuring both classic and contemporary drum sounds. In addition, you can modify the sound of each drum kit in real time using keyboard controllers,
including the modulation (mod) wheel and pitch bend wheel. The following table lists controller information for the drum kits.
Drum Kit

Controller Info

2-Step Remix
Big Beat Remix
Breaks Remix
Classic Hip Hop Remix
Classic House Remix
Drum N Bass Remix
Electroclash Remix
Euro Dance Remix
Hard Techno Remix
Hip Hop Remix
Lo-Fi Remix
Old School Funk Remix
Paris House Remix
RnB Remix
Goa Remix
Trance Remix
Trip Hop Remix
UK Garage Remix

Raising the mod wheel closes the cutoff filter and increases resonance.
Moving the pitch bend wheel raises or lowers the pitch of many drum sounds
(up to 3 octaves higher or lower), so you can change their pitch over time.
You can control the maximum length of most drum sounds using the Release slider in the Generator editor window. Drag the slider left to create short, tight,
punchy sounds, used in certain styles of music.
When using the hi-hat drum sounds (notes F#1 and A#1 in most drum kits),
playing one note will stop the sound of the previously played note, like closing

Les promotions



Numbers '09 Guide de l'utilisateur - Support - Apple
Numbers '09 Guide de l'utilisateur - Support - Apple
27/11/2014 - manuals.info.apple.com
Numbers 09 Guide de l utilisateur KKApple Inc. Copyright © 2011 Apple Inc. Tous droits réservés. En vertu de la législation des droits d auteur, ce manuel ne doit pas être copié, en totalité ou en partie, sans le consentement écrit d Apple. Vos droits sur le logiciel sont régis par le contrat de licence accompagnant le logiciel. Le logo Apple est une marque d Apple Inc., déposée aux États-Unis et dans d autres pays. En l absence du consentement écrit d Apple, l utilisation...

AirPort Extreme Setup Guide - Support - Apple
AirPort Extreme Setup Guide - Support - Apple
27/11/2014 - manuals.info.apple.com
AirPort Extreme Setup Guide Contents 5 6 8 8 11 Chapter 1: Getting Started About the AirPort Extreme About the AirPort Software What You Need to Get Started The AirPort Extreme Status Light 13 14 16 18 Chapter 2: AirPort Extreme Networks Using the AirPort Extreme with a Broadband Internet Service Using the AirPort Extreme to Share a USB Printer Using the AirPort Extreme to Share USB Hard Disks 20 20 22 22 24 25 Chapter 3: Setting Up the AirPort Extreme Using AirPort Utility Creating a New...

iPod Hi-Fi ???????? - Support - Apple
iPod Hi-Fi ???????? - Support - Apple
27/11/2014 - manuals.info.apple.com
iPod Hi-Fi User s Guide Guide de l utilisateur Manual del usuario K Apple Computer, Inc. © 2006 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, AirMac, and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. AirPort Express, iPod Hi-Fi, and MacBook are trademarks of Apple Computer, Inc. Contents 5 iPod Hi-Fi User s Guide 29 53 iPod Hi-Fi Guide de l utilisateur 79 iPod Hi-Fi Manual del usuario 3 iPod Hi-Fi User s Guide Contents 9...

Utilisation de votre Mac mini - Support - Apple
Utilisation de votre Mac mini - Support - Apple
27/11/2014 - manuals.info.apple.com
F3711M40.book Page 1 Wednesday, February 15, 2006 2:05 PM Mac mini Guide de l utilisateur Ce document comprend des informations relatives à la configuration et au dépannage de votre ordinateur Mac mini F3711M40.book Page 2 Wednesday, February 15, 2006 2:05 PM K Apple Computer, Inc. © 2006 Apple Computer, Inc. Tous droits réservés. En application des lois et conventions en vigueur, aucune reproduction totale ni partielle du manuel n est autorisée, sauf consentement écrit préalable d...

Introducción a iWork '08 - Support - Apple
Introducción a iWork '08 - Support - Apple
27/11/2014 - manuals.info.apple.com
Introducción K Apple Inc. © 2007 Apple Inc. Todos los derechos reservados. Según las leyes de propiedad intelectual, este manual no puede copiarse, ni total ni parcialmente, sin el consentimiento por escrito de Apple. El logotipo de Apple es una marca comercial de Apple Inc., registrada en EE UU y en otros países. El uso del logotipo de Apple, producido mediante el teclado (Opción + Mayúsculas + K) para propósitos comerciales y sin el previo consentimiento por escrito de Apple, puede constituir...

MainStage 3 Benutzerhandbuch - Support - Apple
MainStage 3 Benutzerhandbuch - Support - Apple
27/11/2014 - manuals.info.apple.com
MainStage 3 Benutzerhandbuch Für OS X KKApple Inc. Copyright © 2013 Apple Inc. Alle Rechte vorbehalten. Ihre Rechte an der Software unterliegen dem zugehörigen Softwarelizenzvertrag. Der Eigentümer oder berechtigte Benutzer eines legalen Exemplars der MainStage Software darf diese Veröffentlichung zum Zweck der Schulung in der Verwendung dieser Software vervielfältigen. Kein Teil dieser Dokumentation darf für kommerzielle Zwecke, etwa zum Verkauf von Kopien dieser Dokumentation oder zum Bereitstellen...

Processor Cage and Clips Replacement Instructions - Apple
Processor Cage and Clips Replacement Instructions - Apple
27/11/2014 - manuals.info.apple.com
øÿ Mac Pro Processor Cage and Clips Replacement Instructions First Steps 1 Shut down computer. 2 Note: Follow these instructions carefully. Failure to do so could damage your equipment and void its warranty. Wait 10 minutes. Warning: Parts inside computer can be very hot. Allow computer to cool down before continuing. 3 Unplug all external cables except power cord. 4 Touch metal PCI cover on back of computer. 5 Unplug power cord. Opening the Computer 1 Hold side access panel...

Magic Trackpad - ?? ??? - Support - Apple
Magic Trackpad - ?? ??? - Support - Apple
27/11/2014 - manuals.info.apple.com
Magic Trackpad Quick Start Your wireless Apple Magic Trackpad uses Bluetooth® technology to connect to your Mac and comes with two AA batteries installed. Read these instructions to update your software, learn about the indicator light, pair and use your trackpad, and replace the batteries. Updating Your Software To use your Apple Magic Trackpad and all its features, update your Mac to Mac OS X version 10.6.4 or later, and then install the latest trackpad software. To update to the latest...
 
 

Gaming Software Guide - Logitech
Gaming Software Guide - Logitech
05/12/2014 - www.logitech.com
Hjælp til Logitech Gaming Software Logitech ® Gaming Software Hjælp              Aktiviteter... Vil du vide mere?   Opret en ny profil Kom godt i gang   Knyt kommandoer til G-taster/knapper Selvstudier om profiler   Indspil en makro med flere taster Problemløsning   Opdater min software Logitechs supportwebsted I denne hjælp kan du læse mere om Logitechs gaming- og lydenheder. Du skal være opmærksom på at din enhed muligvis ikke har alle de funktioner som beskrives...

2025 Cdp Corporate Questionnaire Submission 2025
2025 Cdp Corporate Questionnaire Submission 2025
25/09/2025 - www.logitech.com
Logitech Europe S.A. 2025 CDP Corporate Questionnaire 2025 Word version Important: this export excludes unanswered questions This document is an export of your organization's CDP questionnaire response. It contains all data points for questions that are answered or in progress. There may be questions or data points that you have been requested to provide, which are missing from this document because they are currently unanswered. Please note that it is your responsibility to verify that your questionnaire...

CP60X
CP60X
18/06/2012 - www.smeg.fr
CP60X Cuisinière multifonction, 60 cm, inox, pyrolyse, porte froide turbochaleur Classe énergétique B EAN13: 8017709101039 Plan de cuisson gaz: 4 brûleurs dont: Arrière gauche: 1,75 kW Avant gauche: ultra-rapide 3,50 kW Arrière droit: 1,75 kW Avant droit: 1,00 kW Puissance nominale gaz: 8 kW Grilles affleurantes en fonte Chapeaux de brûleurs émaillés fonte Allumage électronique intégré aux manettes Brûleurs démontables réglés au gaz naturel Injecteurs gaz butane/propane fournis...

imagePRESS 1135
imagePRESS 1135
09/10/2017 - www.canon.fr
Production numérique noir et blanc Faites désormais une imPRESSion grandiose en noir et blanc Pour faire face aux demandes de production les plus intensives, tournez-vous vers notre produit leader. Avec une productivité incomparable, un choix de médias exceptionnel et une qualité d image imPRESSionnante, l imagePRESS 1135 vous garantit le maintien des délais les plus stricts. Productivité maximale Repérage précis Avec une vitesse d impression pouvant atteindre 125 ppm, maintenue...

LED TV 16/9 - Thomson
LED TV 16/9 - Thomson
13/05/2016 - www.thomsontv.fr
LED TV 16/9 46FW5565 AF T ready Spécifications du 46FW5565 Résolution : 1920x1080 Luminosité : 400 cd/m2 Contraste dynamique : Mega Contrast DR Son : Stéréo 2 x TBC W Prêt pour la télévision numérique haute définition (Canal Ready *: Port CI+ compatible avec le mini-décodeur (ou module) CANAL READY permettant de recevoir les chaînes payantes du groupe CANAL+ via la TNT Connectique numérique : 3 HDMI - HDCP - 1 CMP Port USB Multimédia (vidéo haute définition, photo, musique)...

tôle perforée titan - Dampere
tôle perforée titan - Dampere
17/05/2016 - www.tole-perforee-sur-mesure.com
FICHE TECHNIQUE TÔLES PERFORÉES www.tole-perforee-sur-mesure.com TÔLE PERFORÉE TITAN CATÉGORIE : MOTIF OBLONG RÉFÉRENCE : SPM 10404 PERFORATION: Trous oblong de 3x30 mm VIDE 27 % COURANT: 2000 X 1000 mm BASE: 3000 X 1500 mm MAXI: 4000 X 1500 mm MATIÈRE Acier noir | Acier galva Acier inox | Aluminium Sur demande: - bronze, laiton, cuivre - peinture thermolaquage ou anodisation bronze ou champagne ÉPAISSEUR : 2 mm et 3 mm Délai de production: 10 jours ouvrables après commande et validation...